www.opengearstore.com

Cellular Router: CDMA EV-DO (Verizon), -48v DC external power supply, 1 Ethernet /USB, 4 RS232 console server with cisco pinout.  Includes internal temperature monitoring, Single Ethernet Interface and Cellular Connectivity.  Advanced security to meet the most demanding high security applications. VPN networking with OpenVPN and IPSec. Supports RSA SecurID. Embedded FIPS140-2 OpenSSL cryptographic module. Securely control devices hidden behind firewalls.

Model:	ACM5004-G	ACM5004-G-E	ACM5004-G-I	ACM5004-GS	ACM5004-GV
3G-GSM /UMTS	?	?	?	-	-
3G-CDMA /EV-DO	-	-	-	?	?
Digital I/O	-	?	?	-	-
High Volt DO	-	-	?	-	-
RS232	4	4	4	4	4
RS422/485	-	-	?	-	-
Ethernet	1	1	1	1	1
USB	1	1	1	1	1
Operating Temp	5 - 50°C	5 - 50°C	-35 to 74°C	5 - 50°C	5 - 50°C

	Technical Specifications
Connectors	4 RJ-45 serial ports (2400 to 230,400bps). Cisco compatible RJ-45 pinout 1 RJ-45 10/100Base-T primary Ethernet port 1 External USB-2 expansion connector 1 external 3G cellular aerial  ACM5004-G-E: 4 TTL level digital I/O ports. 5V max @ 20mA  Dry contacts for 4 external water /smoke / motion sensors ACM5004-G-I: 2 TTL level digital I/O ports. 5V max @ 20mA. Also provides contacts for external water /smoke/ motion sensors 2 High-Voltage digital output ports (>5V to <= 30V@ 100 mA)  Dual SMA antenna connectors - for either receive diversity [AUX] or [GPS]
Power	External power source +9V to 30 VDC or 9V to 24 VAC Also supplied with 110-240V AC to 12VDC external power adapter (for operations up to 50° C only) Power Consumption less than 6W ACM5004-x-SDC: (48V DC option available all models) External 36-72V DC to 12V DC external power converter  ACM5004-G-I: Screw terminal block or barrel connector
Dimensions	4" x 3.5" x 1 1/8"  (10.2 x 8.8 x 2.8 cm) Wall and rack mount bracket ACM5004-G-I: Also includes DIN rail mount
Environmental	Ambient operating temperature: 5°C to 50°C (41 to 122°F) Non operating storage temp: -30 to +60°C (-20 to +140°F) Humidity: 5% to 90% Internal temperature sensor  ACM5004-G-I: Ambient operating temperature: -35° to 74° C (-31° to 165° F) Non operating storage temp: -40° to 85° C (-40 to 185° F)
Regulatory	Safety:  UL/cUL/TUV/CB 60950  EMC (Emissions & Immunity):  CE, FCC Part 15 Class B, C-Tick, AS/NZS CISPR 22, EN55024, EN55022 Class A  Cellular Wireless Certifications:  PTCRB, NAPRD.03, R&TTE, EN 301 511, A-Tick (GSM/UMTS)  CDG TIA/EIA-690, CDG TIA/EIA-98-E (CDMA/EV-DO pending)
CPU	250Mhz Micrel KSZ8692 ARM9 System on Chip
Memory	32MB DDR RAM 16MB Embedded Flash
Operating System	Linux with source code access  Custom development kit (CDK)

Wireless Specifications Opengear ACM5000 cellular routers operate either on the 3G CDMA/EV-DO or the 3G GSM/UMTS network:  3G-GSM/UMTS ACM5004-G, ACM5004-G-E, ACM5004-G-I Air Interface EDGE, GPRS, GSM, HSDPA, HSUPA Quad-band for global connectivity; Supported networks include ATT, T-Mobile (USA), Telstra & Optus (Australia); User provides SIM Card Frequency Bands 850/900/1900/2100 MHz WCDMA Power class 3 (+24dBm); 850/900 MHz GSM/GPRS/EDGE GSM Power class 4/EDGE E2; 1800/1900 MHz GSM/GPRS/EDGE GSM Power Class 1/EDGE E2; GPS/1575.42 MHz Data Services 850/900/1900/2100 MHz WCDMA (HSDPA and HSPA) Downlink up to 7.2 Mbps Uplink up to 5.76 Mbps; 850/900/1800/1900 MHz GSM/GPRS/EDGE Downlink up to 236 Kbps Uplink up to 236 Kbps 3G-CDMA/EV-DO ACM5004-GS, ACM5004-GV Air Interface Dual-band ACM5004-GS supports Sprint network ACM5004-GV supports Verizon network Frequency Bands Dual Band; 800MHz North American Cellular band; 1900MHz North American PCS band Data Services CDMA 1xEV-DO Revision A (IS-856-A) Forward link up to 3.1 Mbps Reverse link 1.8 Mbps; CDMA 1xEV-DO Rel 0(IS-856) Forward link up to 2.4 Mbps Reverse link 153.6 Kbps CDMA 1xRTT (IS-2000) Forward and reverse link speeds up to 153.6Kbps Opengear cellular products by default work in packet switched (PSD) mode across the public Internet or telco managed IP-WANs. By default they do not operate in circuit switched (CSD) mode like a dial-up modem and answer data calls. However expert users/developers can program them to operate in CSD mode for legacy applications. To use an Opengear cellular product you need a corporate mobile data service/plan (and a SIM card for GSM) from your telco provider with a public (static or dynamic) IP address. If your plan only provides a private IP address which is not visible across the Internet: you can deploy a VCMS or CMS6100 at the central location which will provides a gateway to remote cellular units these cellular devices can also be accessed over corporate VPNs using IPSec or OpenSSL For more details faq377-Public-IP.html  Access to remote cellular devices is via a secure browser (HTTPS), secure terminal emulators (SSH) Opengear’s SDTConnector SSH tunnelling software enables access specific network services (RDP, VNC, SOL, KVM over IP) Opengear cellular products also support M2M applications, serial COM port redirection (PortShare), serial bridging and digital I/O control Managed devices on the Opengear device’s private network can be securely IP accessible from VPN clients or the corporate VPN

• 
  Cellular throughput up to 7.2 Mbps downlink and 5.76 Mbps uplink
• 3G CDMA/EV-DO & GSM/UMTS models. PTCRB certified (world wide deployment)
• Small, ruggedized enclosure with wall mount brackets (DIN rail option)
• Ethernet, USB, serial and digital IO connectivity in a single device
• Four RS232 serial ports. TCP access. COM port redirection (RS422/485 option)
• Operating temperature range up to -35° to 74° C
• Wide AC and DC input voltage range
• Small form factor with waterproof NEMA enclosure option
• Monitor ambient temperature, humidity, door contacts, smoke alarms
• Monitor cellular network performance
• Extensive remote UPS and PDU management. Vendor independent
• Accessible without a public IP address with Call Home

Benefits

• Monitor and access all on-site networked and serial devices
• Access the unreachable -manage equipment behind remote firewalls and VPNs
• Monitor and control the environment at the remote site
• Enhanced security for connection over public cellular network. VPN. SSH. AAA
• Scan remote data and create proactive custom solutions
• Remote power cycle devices. Manage batteries. Control load
• Control remote relays, displays, sensors with digital I/O ports
• Easy troubleshooting with on- & off-line data logging with time stamps
• Event tracking & corrective action - alert notification. Custom auto response
• Simple centralized admin using SolarWinds, Zenoss, Nagios, VCMS
• High data speeds for back up remote network connection
• Affordable alternative to fixed-line connection
• Industrial grade solution for use in demanding environments

Security and Authentication

IPsec and OpenVPN support TACACS+, RADIUS SecurID, LDAP and local authentication Secure Shell (SSH V2 and V3) FIPS compliant OpenSSH System event syslog SSH port and IP forwarding support IP packet filtering Unlimited user accounts

Serial Port Management

SSH tunneled serial bridging Break over SSH support Port triggers with SMNP and email alerts Offline data logging (Syslog, NFS, CIFS) Multiple users per port (with port sniffing) Access by TCP port Telnet / Unauthenticated Telnet SSH/Raw TCP connect RFC 2217 - Port Redirection

LAN Management

Secure SSH tunneling with Remote Desktop, VNC, browser and telnet access Limit user access by LAN device and SDT service for that device Port triggers with SMNP and email alerts for all tunnel traffic No limit on number of hosts being concurrently accessed through the one tunnel Up to 50 concurrent SSH sessions can be open concurrently to cellular router No limit on number of clients who can access the one cellular router Embedded DHCP server for management LAN devices

Power Management

Network UPS Tools for UPS Monitoring and Management PowerMan for PDU and RPS Management Hotkey for in session power menu

System Management

Secure web management (HTTPS) and local browser management (HTTP) Command line interface to Linux shell Auto connects with VCMS/CMS6100 central management system Nagios distributed monitoring ARP-Ping for IP address assignment SNMP with custom MIB

Environmental Monitoring and DIO

Internal temperature sensor Support for attaching Environmental Monitoring Devices (EMD5000) to serial ports Web interface for environmental graphing, logs, status and alerts Optional support for attaching external smoke, fire, vibration, water detection and door contact sensors Optional Digital I/O ports

Other Protocols Supported

DHCP server and client for dynamic IP assignment NTP for time synchronization PPP for dial up access NAT port redirection

Upgrades

Flash upgradeable Free upgrades from online FTP site HTTP, FTP, TFTP client for file transfer

Operating System

Embedded Linux 2.6 with source code access Custom development kit